Installation Guide of LED downlights and Recessed Lighting

Both can lights (also known as recessed lighting) and LED downlights are an excellent choice for delivering a sleek, modern look to your rooms. They are also a great way to create a more energy efficient environment, as they use 85% less energy than standard incandescent bulbs.

Installing LED recessed lighting is easy! Essentially, you remove the trim from your existing fixture, and screw in an LED module adapter. This makes these retrofits a simple DIY project that can be completed in just two minutes!

LED Downlights by AGM Electrical Supplies:

Whether you want to update the look of your living space or simply brighten up a drab corner, a new lighting system is always a smart investment. You can choose from a wide variety of styles and designs at AGM Electrical Supplies to suit your home's decor and needs. They are both easy to install. They can either be installed directly into the ceiling or retrofitted into preexisting recessed lights.

They can also be placed above counters, desks, cabinets or other work surfaces to illuminate them and make them more functional. Some LED downlights by AGM can even be moved and tilted to highlight artwork, architectural features or other items in a room. Downlights are a must have in any modern home because they offer a clean, simple style that's hard to match. They're also one of the easiest and most affordable ways to transform a space into a more contemporary layout.

Installation Steps:

Follow the mentioned steps to install led downlights at your homes, offices and industries ideally.

Measuring the Area before Installation:

Measure the area before installing led downlights at homes; it is important to measure the area of the space that needs to be illuminated. This will help you choose the right size, color temperature and material. Traditionally, area is measured in square units like square inches (in2) or square feet (ft2), but it can also be calculated using the formula for area. To calculate the area of a two-dimensional figure, take the length and width measurements and multiply them together to get the total square foot measurement. Downlights with narrow beam angles are preferred to provide focus task lighting, such as around a shaving area in the bathroom or above a kitchen surface used for food preparation. Moreover, spacing downlights should be about 75cm apart to ensure that light spreads evenly and creates a spacious appearance.

Choosing the Appropriate Size:

Choose the right size when it comes to installing led downlights at homes. This will depend on the room’s size, intended use and decor. Once you have measured the area, choose the downlights that will suit it best. Then, calculate how many downlights you need to achieve the desired lighting levels in your home.

Consider the Color Temperature of Downlights:

The color temperature of led downlights is a critical factor when choosing the right LED lighting for your space. This is because the lighting’s color temperature has an effect on human mood and behavior, so it needs to be selected based on specific criteria such as the purpose of the space, the style of decor, etc. Most LEDs have a Kelvin lighting scale that corresponds to traditional white light, from warm (2700K) to cool (5000K). You can also find a range of trim types for recessed downlights. Some led products that reduces glare and allows you to adjust the beam-angle. This trim type is especially popular for accent or wall-wash lighting needs.

Choosing the Right Material:

Choose the right Material If you are planning to install led downlights at your home; it is important that you choose the right material. Choosing the wrong material can make your LED downlights unusable. When you are selecting the right material, consider factors like wattage, spacing, beam angle, and IC & IP rating.

Choosing the Appropriate Products:

There are a variety of dimming options available at AGM Electrical Supplies for LED downlights and recessed lighting. Choosing the right one can help you save money and create the perfect mood in your home or business.

The brightness produced by the recessed lights is another factor needed to be considered before buying one. The amount of brightness produced by each recessed light depends on the type chosen. The models that produce high brightness use less power, and they can last up to 25 times longer than traditional incandescent bulbs.